Описание

2-way stainless steel ball valve for shut-off of inert gases and liquids. The body is made of a three-part screwed body construction with full cylindrical bore. Due to the self-adjusting, multi-part stem seal, the ball valve is maintenance-free. The ball valve is stamped conform to AD approval and has a fire-safe certification and an anti-static device. A TA-Luft approval is in preparation.The mounting plate according to ISO 5211 enables a direct or distanced mounting of the pneumatic actuators, resulting in an extremely compact and functional unit. Due to the twin-piston system the force developed by the counter-running pistons is transmitted to one common pinion via two tooth racks solidly connected with the pistons. This principle ensures a linear torque transmission along the entire stroke.The function of this ball valve actuator unit is pneumatically double-acting. Further information can be found in our technical portal. The actuator is completely assembled in our factory, adjusted and subjected to a functional test before delivery.Features:
  • Mounting pad for actuator with two scribed circles
  • Simple, standardized assembly of extensions, signal transmitters or control devices conform with EN 12116 (ISO5211)
  • Stem seals with spring washer set and lock plate, maintenance free
  • Body parts with centering grooved and tongued, for ease assembly (e.g. after welding)
For higher temperatures above +80°C please refer to the Pressure-Temperature-Diagram in the data sheet.The ball valve is available in many variants and designs and can be ordered online in our shop:
  • two sides female threaded connection
  • two sides welded connection
  • cavity-free sealing system
  • Temperature version with pressure compensation bore and ball seals with reinforced carbon fibre
  • direct mounted limit switches and solenoid valves
For the use of the ball valve in explosive atmospheres according to Directive 2014/34/EU, a special ATEX version is also available.
SKUZA67-EE85
DescriptionBall valve DN50 ZA-welding face, with drive EE85, Stainless steel / PTFE FKM, spring return
Weight [kg]9.250000
Ball materialStainless steel
Nominal sizeDN050
Body materialStainless Steel
Functionsingle acting
Body materialEdelstahl
Seals materialPTFE
Stem seals materialPTFE/FKM/Graphit
Operationpneumatic - single acting
Connection typeWelding Connection DIN3239
Connection size50
Nominal pressure min. [bar]0
Nominal pressure max. [bar]16
Test pressure PT [bar]24
Temperature range min. [°C]-20
Temperature range max. [°C]+80
Media temperature min. [°C]-30
Media temperature max. [°C]+120
Gehäusedesign3-teilig
''